AlloyGators are made from a super tough nylon which is flexible and won’t damage your alloy wheels during installation, but is tough enough to give superior protection. 

Color runs consistently throughout the wheel protectors, meaning that there is no damage to colour, even after impact with a curb. We recommend you regularly clean your wheels and AlloyGators with normal car shampoo or universal wheel cleaners suitable for delicate finishes like chrome. Avoid harsh acid based cleaners and thick, brush-on tire shines used by some hand car-washes.

To remove an AlloyGator, simply jack up the car, fully deflate the tire, remove the plastic joining clip and carefully prise the profile up around the joint area. Firmly tap the face of the AlloyGator using a rubber mallet on the side which has the hole in it. This will then release the glue and open up the joint. Once the joint is open carefully prise the profile out of its seated position from the tire side of the wheel, starting with the end without the hole and using a tire lever or flat bladed screwdriver along the side and under the profile, prising in an upward motion. Once the end of the profile is free from the wheel and tire then carefully pull it out from its position across the tire wall in an outward motion in order to prevent any damage to the wheel from the stainless steel clips.

Our AlloyGators have been tested under normal driving conditions and within the legal speed limit. 

Yes, AlloyGators are recyclable and we advise to put your AlloyGator cut offs in your recycling bin.