Product & Fitting
AlloyGators are made from a super tough nylon which is flexible but tough enough to give superior protection when getting heavy impact from hitting a kerb.
The AlloyGator is locked to the wheel over 360° using highly robust patented technology.
Colour runs consistently throughout our AlloyGator wheel protectors, meaning that there is no damage to colour, even after impact with a kerb.
We recommend you regularly clean your wheels and AlloyGators with normal car shampoo or universal wheel cleaners suitable for delicate finishes like chrome. Avoid harsh acid based cleaners and thick, brush-on tyre shines used by some hand car-washes.
You can fit AlloyGators yourself or get them fitted by one of our authorised AlloyGator fitters.
If you have a rubber mallet and a car jack you are good to go! Make sure to check the suitability gauge against your wheels before attempting to fit your AlloyGators.
Follow the fitting instructions in the box or view our fitting video for a step by step guide
If you are interested in having your AlloyGators fitted by one our of fitting partners, head over to our find a fitter page to find your nearest AlloyGator fitter.
If you buy AlloyGators and 5 Star Fitting on our website you’ll benefit from an extended warranty of 2 years.
To remove an AlloyGator, simply jack up the car, fully deflate the tyre, remove the plastic joining clip and carefully prise the profile up around the joint area. Firmly tap the face of the AlloyGator using a rubber mallet on the side which has the hole in it. This will then release the glue and open up the joint. Once the joint is open carefully prise the profile out of its seated position from the tyre side of the wheel, starting with the end without the hole and using a tyre lever or flat bladed screwdriver along the side and under the profile, prising in an upward motion. Once the end of the profile is free from the wheel and tyre then carefully pull it out from its position across the tyre wall in an outward motion in order to prevent any damage to the wheel from the stainless steel clips.
Our AlloyGators have been tested under normal driving conditions and within the legal speed limit. Head over to our Quality and Testing page to view our certifications.
Yes, AlloyGators are recyclable and we advise to put your AlloyGator cut offs in your recycling bin.
Our AlloyGators are not deemed a performance enhancing product and fitting them to your vehicle should not affect your vehicle insurance premium, however we would recommend you speak to your insurance company to discuss your own individual requirements.